NETGEAR ProSafe GSM7224P User Manual

Switching Commands
123
ProSafe Managed Switch
no lacp actor system priority
Use this command to configure the priority value associated with the Actor’s SystemID.
Format no lacp actor system priority
Mode
lacp partner admin key
Use this command to configure the administrative value of the Key for the protocol partner.
The valid range for <key> is 0 to 65535.
Default
Format lacp partner admin key
Mode
Note: This command is only applicable to physical interfaces.
no lacp partner admin key
Use this command to configure the administrative value of the Key for the protocol partner.
Format no lacp partner admin key <key>
Mode
lacp partner admin state individual
Use this command to set LACP partner admin state to individual.
Format lacp partner admin state individual
Mode
Note: This command is only applicable to physical interfaces.
no lacp partner admin state individual
Use this command to set the LACP partner admin state to aggregation.
Format no lacp partner admin state individual
Mode
Interface Config
0x0
Interface Config
Interface Config
Interface Config
Interface Config

NETGEAR ProSafe GSM7224P Specifications

General

Brand	NETGEAR
Model	ProSafe GSM7224P
Category	Switch
Language	English