Utility Commands
556
ProSafe Managed Switch
ip domain name
Use this command to define a default domain name that the software uses to complete
unqualified host names (names with a domain name).
By default, no default domain name is
configured in the system. <name> may not be longer than 255 characters and should not
include an initial period. This <name> should be used only when the default domain name list,
configured using the ip domain list command, is empty.
Default
Format ip domain name <name>
Mode
Example: The CLI command ip domain name yahoo.com will configure yahoo.com as a default domain name.
For an unqualified hostname xxx, a DNS query is made to find the IP address corresponding to xxx.yahoo.com.
no ip domain name
Use this command to remove the default domain name configured using the ip domain
name command.
Format no ip domain name
Mode
ip domain list
Use this command to define a list of default domain names to complete unqualified names.
By default, the list is empty. Each name must be no more than 256 characters, and should
not include an initial period. The default domain name, configured using the ip domain
name command, is used only when the default domain name list is empty. A maximum of 32
names can be entered in to this list.
Default
Format ip domain list <name>
Mode
no ip domain list
Use this command to delete a name from a list.
Format no ip domain list <name>
Mode
ip name server
Use this command to configure the available name servers. Up to eight servers can be
defined in one command or by using multiple commands. The parameter
none
Global Config
Global Config
none
Global Config
Global Config
To Next Page
Loading...
