NETGEAR ProSafe GSM7224P - Clear Ip Dhcp Binding; Clear Ip Dhcp Conflict; Show Ip Dhcp Binding; Clear Ip Dhcp Server Statistics

Utility Commands
552
ProSafe Managed Switch
no ip dhcp conflict logging
This command disables conflict logging on DHCP server.
Format no ip dhcp conflict logging
Mode
clear ip dhcp binding
This command deletes an automatic address binding from the DHCP server database. If “*” is
specified, the bindings corresponding to all the addresses are deleted. <address> is a valid
IP address made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is
invalid.
Format clear ip dhcp binding {<address> | *}
Mode
clear ip dhcp server statistics
This command clears DHCP server statistics counters.
Format clear ip dhcp server statistics
Mode
clear ip dhcp conflict
The command is used to clear an address conflict from the DHCP Server database. The
server detects conflicts using a ping. DHCP server clears all conflicts If the asterisk (*)
character is used as the address parameter.
Default
Format clear ip dhcp conflict {<address> | *}
Mode
show ip dhcp binding
This command displays address bindings for the specific IP address on the DHCP server. If
no IP address is specified, the bindings corresponding to all the addresses are displayed.
Format show ip dhcp binding [<address>]
Modes
• Privileged EXEC
• User EXEC
Global Config
Privileged EXEC
Privileged EXEC
none
Privileged EXEC