NETGEAR ProSafe GSM7224P - Lacp Partner Admin State Longtimeout; Lacp Partner Admin State Passive

Switching Commands
124
ProSafe Managed Switch
lacp partner admin state longtimeout
Use this command to set LACP partner admin state to longtimeout.
Format lacp partner admin state longtimeout
Mode
Note: This command is only applicable to physical interfaces.
no lacp partner admin state longtimeout
Use this command to set the LACP partner admin state to short timeout.
Format no lacp partner admin state longtimeout
Mode
Note: This command is only applicable to physical interfaces.
lacp partner admin state passive
Use this command to set the LACP partner admin state to passive.
Format lacp partner admin state passive
Mode
Note: This command is only applicable to physical interfaces.
no lacp partner admin state passive
Use this command to set the LACP partner admin state to active.
Format no lacp partner admin state passive
Mode
Interface Config
Interface Config
Interface Config
Interface Config