NETGEAR ProSafe GSM7224P - Show Ip Pim Rp Mapping

IP Multicast Commands
339
ProSafe Managed Switch
show ip pim rp mapping
This command displays the mappings for the PIM group to the active rendezvous points..
Format show ip pim rp mapping [<rp address> | candidate | static]
Modes
RP Address
Group Address
Group Mask
Origin
Expiry Time
Example:1
(Switch) #show ip pim rp mapping 192.168.10.1
RP Address 192.168.10.1
Group Address 224.1.2.1
Group Mask 255.255.255.0
Origin Static
Expiry Time (hh:mm:ss) NA
Example:2
(Switch) #show ip pim rp mapping
RP Address 192.168.10.1
Group Address 224.1.2.1
Group Mask 255.255.255.0
Origin Static
Expiry Time (hh:mm:ss) NA
RP Address 192.168.20.1
Group Address 229.2.0.0
Group Mask 255.255.0.0
Origin Static
Expiry Time (hh:mm:ss) NA
Example:3
(Switch) #show ip pim rp mapping candidate
RP Address 192.168.10.1
Group Address 224.1.2.1
Group Mask 255.255.255.0
Origin BSR
Expiry Time (hh:mm:ss) 00:00:08
Example:4
(Switch) #show ip pim rp mapping static
Privileged EXEC
Term Definition
The IP address of the RP for the group specified.
Address of the multicast group
Mask for the group address.
Origin from where this group mapping is learned.
Expiry time of the elected RP.