NETGEAR ProSafe GSM7224P - Port-Security Max-Dynamic; Port-Security Max-Static

Switching Commands
183
ProSafe Managed Switch
port-security
This command enables port locking at the system level (Global Config) or port level
(Interface Config)
Default
Format port-security
Mode
• Global Config
• Interface Config
.
no port-security
This command disables port locking for one (Interface Config) or all (Global Config) ports.
Format no port-security
Mode
• Global Config
• Interface Config
port-security max-dynamic
This command sets the maximum number of dynamically locked MAC addresses allowed on
a specific port.
Default
Format port-security max-dynamic
<maxvalue>
Mode
no port-security max-dynamic
This command resets the maximum number of dynamically locked MAC addresses allowed
on a specific port to its default value.
Format no port-security max-dynamic
Mode
port-security max-static
This command sets the maximum number of statically locked MAC addresses allowed on a
port
.
Default
Format port-security max-static
<maxvalue>
Mode
disabled
600
Interface Config
Interface Config
20
Interface Config