NETGEAR ProSafe GSM7224P - Enable (Rip); Ip Rip

Routing Commands
309
ProSafe Managed Switch
enable (RIP)
This command resets the default administrative mode of RIP in the router (active).
Default
Format enable
Mode
no enable (RIP)
This command sets the administrative mode of RIP in the router to inactive.
Format no enable
Mode
ip rip
This command enables RIP on a router interface.
Default
Format ip rip
Mode
no ip rip
This command disables RIP on a router interface.
Format no ip rip
Mode
auto-summary
This command enables the RIP auto-summarization mode.
Default
Format auto-summary
Mode
no auto-summary
This command disables the RIP auto-summarization mode.
Format no auto-summary
Mode
enabled
Router RIP Config
Router RIP Config
disabled
Interface Config
Interface Config
disabled
Router RIP Config
Router RIP Config