Routing Commands
233
ProSafe Managed Switch
arp cachesize
This command configures the ARP cache size. The ARP cache size value is a platform
specific integer value. The default size also varies depending on the platform.
Format arp cachesize <platform specific integer value>
Mode
no arp cachesize
This command configures the default ARP cache size.
Format no arp cachesize
Mode
arp dynamicrenew
This command enables the ARP component to automatically renew dynamic ARP entries
when they age out.
Default
Format arp dynamicrenew
Mode
no arp dynamicrenew
This command prevents dynamic ARP entries from renewing when they age out.
Format no arp dynamicrenew
Mode
arp purge
This command causes the specified IP address to be removed from the ARP cache. Only
entries of type dynamic or gateway are affected by this command.
Format arp purge <ipaddr>
Mode
arp resptime
This command configures the ARP request response timeout.
Global Config
Global Config
enabled
Privileged EXEC
Privileged EXEC
Privileged EXEC
To Next Page
Loading...
