Switching Commands
168
ProSafe Managed Switch
show igmpsnooping mrouter interface
This command displays information about statically configured ports.
Format show igmpsnooping mrouter interface <unit/slot/port>
Mode
Interface
Multicast
Router
Attached
VLAN ID
show igmpsnooping mrouter vlan
This command displays information about statically configured ports.
Format show igmpsnooping mrouter vlan <unit/slot/port>
Mode
Interface
VLAN ID
show mac-address-table igmpsnooping
This command displays the IGMP Snooping entries in the MFDB table.
Format show mac-address-table igmpsnooping
Mode
Privileged EXEC
Term Definition
The port on which multicast router information is being displayed.
Indicates whether multicast router is statically enabled on the interface.
The list of VLANs of which the interface is a member.
Privileged EXEC
Term Definition
The port on which multicast router information is being displayed.
The list of VLANs of which the interface is a member.
Privileged EXEC
Term Definition
MAC Address
A multicast MAC address for which the switch has forwarding or filtering information. The
format is two-digit hexadecimal numbers that are separated by colons, for example
01:23:45:67:89:AB. In an IVL system the MAC address is displayed as a MAC address
and VLAN ID combination of 8 bytes.
Type
The type of the entry, which is either static (added by the user) or dynamic (added to the
table as a result of a learning process or protocol).
Description
The text description of this multicast table entry.
Interfaces
The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).
To Next Page
Loading...
Need help?
General