Switching Commands
194
ProSafe Managed Switch
LLDP-MED Commands
Link Layer Discovery Protocol - Media Endpoint Discovery (LLDP-MED) (ANSI-TIA-1057)
provides an extension to the LLDP standard. Specifically, LLDP-MED provides extensions for
network configuration and policy, device location, Power over Ethernet (PoE) management
and inventory management.
lldp med
Use this command to enable MED. By enabling MED, you will be effectively enabling the
transmit and receive function of LLDP.
Default
Format lldp med
Mode
no lldp med
Use this command to disable MED.
Format no lldp med
Mode
Port ID
The port number that transmitted the LLDPDU.
System Name
The system name of the local device.
System
Description
Describes the local system by identifying the system name and versions of hardware,
operating system, and networking software supported in the device.
Port
Description
Describes the port in an alpha-numeric format.
System
Capabilities
Supported
Indicates the primary function(s) of the device.
System
Capabilities
Enabled
Shows which of the supported system capabilities are enabled.
Management
Address
The type of address and the specific address the local LLDP agent uses to send and
receive information.
enabled
Interface Config
Interface Config
Term Definition
To Next Page
Loading...
