NETGEAR ProSafe GSM7224P - Dns-Server (Ipv); Domain-Name (Ipv)

IPv6 Commands
411
ProSafe Managed Switch
These pools are shared between multiple interfaces over which DHCPv6 server capabilities
are configured.
Format ipv6 dhcp pool <pool-name>
Mode
no ipv6 dhcp pool
This command removes the specified DHCPv6 pool.
Format no ipv6 dhcp pool <pool-name>
Mode
domain-name (IPv6)
This command sets the DNS domain name which is provided to DHCPv6 client by DHCPv6
server. DNS domain name is configured for stateless server support. Domain name consist
of no more than 31 alpha-numeric characters. DHCPv6 pool can have multiple number of
domain names with maximum of 8.
Format domain-name <dns-domain-name>
Mode
no domain-name
This command will remove dhcpv6 domain name from dhcpv6 pool.
Format no domain-name <dns-domain-name>
Mode
dns-server (IPv6)
This command sets the ipv6 DNS server address, which is provided to dhcpv6 client by
dhcpv6 server. DNS server address is configured for stateless server support. DHCPv6 pool
can have multiple number of domain names with maximum of 8.
Format dns-server <dns-server-address>
Mode
no dns-server
This command will remove DHCPv6 server address from DHCPv6 server.
Format no dns-server <dns-server-address>
Mode
Global Config
Global Config
IPv6 DHCP Pool Config
IPv6 DHCP Pool Config
IPv6 DHCP Pool Config
IPv6 DHCP Pool Config