NETGEAR ProSafe GSM7224P - Ip Irdp Holdtime; Ip Irdp Maxadvertinterval

Routing Commands
251
ProSafe Managed Switch
no ip irdp multicast
This command configures the address used to advertise the router to the Broadcast address
(255.255.255.155)..
Format no ip irdp multicast
Mode
ip irdp holdtime
This command configures the value, in seconds, of the holdtime field of the router
advertisement sent from this interface. The holdtime range is the value of
<maxadvertinterval> to 9000 seconds.
Default
Format ip irdp holdtime <maxadvertinterval-9000>
Mode
no ip irdp holdtime
This command configures the default value, in seconds, of the holdtime field of the router
advertisement sent from this interface.
Format no ip irdp holdtime
Mode
ip irdp maxadvertinterval
This command configures the maximum time, in seconds, allowed between sending router
advertisements from the interface. The range for maxadvertinterval is 4 to 1800 seconds.
Default
Format ip irdp maxadvertinterval <4-1800>
Mode
no ip irdp maxadvertinterval
This command configures the default maximum time, in seconds.
Format no ip irdp maxadvertinterval
Mode
Interface Config
3 * maxinterval
Interface Config
Interface Config
600
Interface Config
Interface Config