NETGEAR ProSafe GSM7224P - DHCP Client Commands; Dhcp Client Vendor-ID-Option; Dhcp Client Vendor-ID-Option-String

Switching Commands
144
ProSafe Managed Switch
6 Enabled Enabled broadcom
7 Enabled Disabled --NULL—
8 Enabled Disabled --NULL—
9 Enabled Disabled --NULL—
10 Enabled Disabled --NULL--
DHCP Client Commands
DHCP Client can include vendor and configuration information in DHCP client requests
relayed to a DHCP server. This information is included in DHCP Option 60, Vendor Class
Identifier. The information is a string of 128 octets.
dhcp client vendor-id-option
Use this command to enable the inclusion of DHCP Option-60, Vendor Class Identifier
included in the requests transmitted to the DHCP server by the DHCP client operating in the
switch.
Format dhcp client vendor-id-option
Mode
no dhcp client vendor-id-option
Use this command to disable the inclusion of DHCP Option-60, Vendor Class Identifier
included in the requests transmitted to the DHCP server by the DHCP client operating in the
switch.
Format no dhcp client vendor-id-option
Mode
dhcp client vendor-id-option-string
Use this command to set the DHCP Vendor Option-60 string to be included in requests
transmitted to the DHCP server by the DHCP client operating in the switch.
Format dhcp client vendor-id-option-string <string>
Mode
no dhcp client vendor-id-option-string
Use this command to clear the DHCP Vendor Option-60 string.
Format no dhcp client vendor-id-option-string
Mode
Global Config
Global Config
Global Config
Global Config