NETGEAR ProSafe GSM7224P - Show Authentication Methods; Show Dot1 X Authentication-History

Switching Commands
99
ProSafe Managed Switch
show dot1x authentication-history
This command displays 802.1X authentication events and information during successful and
unsuccessful Dot1x authentication process for all interfaces or the specified interface. Use
the optional keywords to display only failure authentication events in summary or in detail.
Format show dot1x authentication-history {unit/slot/port | all}
[failedauth-only] [detail]
Mode
show authentication methods
This command displays information about the authentication methods.
Format show authentication methods
Mode
The following is an example of this command:
Login Authentication Method Lists
________________________________
Console_Default: None
Network_Default:Local
Enable Authentication Lists
_____________________
Console_Default: Enable None
Network_Default:Enable
Line Login Method List Enable Method Lists
_____________________
Console Console_Default Console_Default
Telnet Network_Default Network_Default
SSH Network_Default Network_Default
http : Local
https : Local
dot1x :
Privileged EXEC
Term Definition
Time Stamp
The exact time at which the event occurs.
Interface
Physical Port on which the event occurs.
Mac-Address
The supplicant/client MAC address.
VLAN assigned
The VLAN assigned to the client/port on authentication.
VLAN assigned
Reason
The type of VLAN ID assigned, which can be Guest VLAN, Unauth, Default, RADIUS
Assigned, or Monitor Mode VLAN ID.
Auth Status
The authentication status.
Reason
The actual reason behind the successful or failed authentication.
Privileged EXEC