NETGEAR ProSafe GSM7224P - Show Ip Dvmrp Prune; Show Ip Dvmrp Route

Source IP
Source Mask
Next Hop
Interface
Type
IP Multicast Commands
328
ProSafe Managed Switch
show ip dvmrp prune
This command displays the table listing the router’s upstream prune information.
Format show ip dvmrp prune
Modes
• Privileged EXEC
• User EXEC
Group IP
Source IP
Source Mask
Expiry Time
(secs)
show ip dvmrp route
This command displays the multicast routing information for DVMRP.
Format show ip dvmrp route
Modes
• Privileged EXEC
• User EXEC
Term Definition
The sources for which this entry specifies a next hop on an outgoing interface.
The IP Mask for the sources for which this entry specifies a next hop on an outgoing
interface.
The interface in unit/slot/port format for the outgoing interface for this next hop.
The network is a LEAF or a BRANCH.
Term Definition
The multicast Address that is pruned.
The IP address of the source that has pruned.
The network Mask for the prune source. It should be all 1s or both the prune source and
prune mask must match.
The expiry time in seconds. This is the time remaining for this prune to age out.
Term Definition
Source Address
The multicast address of the source group.
Source Mask
The IP Mask for the source group.
Upstream
Neighbor
The IP address of the neighbor which is the source for the packets for a specified
multicast address.
Interface
The interface used to receive the packets sent by the sources.
Metric
The distance in hops to the source subnet. This field has a different meaning than the
Interface Metric field.