NETGEAR ProSafe GSM7224P - Captive Portal User Group Commands; Clear Captive-Portal Users; User Group (Create); User Group Name

Captive Portal Commands
715
ProSafe Managed Switch
clear captive-portal users
Use this command to delete all captive portal user entries.
Format clear captive-portal users
Mode
Captive Portal User Group Commands
The following section describes captive portal user group commands.
user group (Create)
Use this command to create a user group. User group 1 is created by default and cannot be
deleted.
Default
Format user group <1-10>
Mode
no user group
Use this command to delete a user group. The default user group (1) cannot be deleted.
Format user group <1-10>
Mode
user group name
Use this command to configure a group name. <1-10> is the user group ID. The name can be
a string up to 32 characters.
Format user group <1-10> name name
Mode
user group rename
Use this command to change a group's ID to a different group ID.
Format user group group-id rename new-group-id
Mode
Privileged EXEC mode
1
Captive Portal Configuration mode
Captive Portal Configuration mode
Captive Portal Configuration mode
Captive Portal Configuration mode