NETGEAR ProSafe GSM7224P - Show Mac-Addr-Table

Utility Commands
510
ProSafe Managed Switch
show mac-addr-table
This command displays the forwarding database entries. These entries are used by the
transparent bridging function to determine how to forward a received frame.
Enter all or no parameter to display the entire table. Enter a MAC Address and VLAN ID to
display the table entry for the requested MAC address on the specified VLAN. Enter the
count parameter to view summary information about the forwarding database table. Use the
interface <unit/slot/port> parameter to view MAC addresses on a specific
interface. Use the vlan <vlan_id> parameter to display information about MAC addresses
on a specified VLAN.
Format show mac-addr-table [{<macaddr> <vlan_id> | all | count | interface
<unit/slot/port> | vlan <vlan_id>}]
Mode
Multicast
Packets
Transmitted
The total number of packets that higher-level protocols requested be transmitted to a
Multicast address, including those that were discarded or not sent.
Broadcast
Packets
Transmitted
The total number of packets that higher-level protocols requested be transmitted to the
Broadcast address, including those that were discarded or not sent.
Transmit
Packets
Discarded
The number of outbound packets which were chosen to be discarded even though no
errors had been detected to prevent their being deliverable to a higher-layer protocol.
A
possible reason for discarding a packet could be to free up buffer space.
Most Address
Entries Ever
Used
The highest number of Forwarding Database Address Table entries that have been
learned by this switch since the most recent reboot.
Address Entries
Currently in Use
The number of Learned and static entries in the Forwarding Database Address Table for
this switch.
Maximum VLAN
Entries
The maximum number of Virtual LANs (VLANs) allowed on this switch.
Most VLAN
Entries Ever
Used
The largest number of VLANs that have been active on this switch since the last reboot.
Static VLAN
Entries
The number of presently active VLAN entries on this switch that have been created
statically.
Dynamic VLAN
Entries
The number of presently active VLAN entries on this switch that have been created by
GVRP registration.
VLAN Deletes
The number of VLANs on this switch that have been created and then deleted since the
last reboot.
Time Since
Counters Last
Cleared
The elapsed time, in days, hours, minutes, and seconds, since the statistics for this
switch were last cleared.
Privileged EXEC
Term Definition