Switching Commands
165
ProSafe Managed Switch
set igmp mrouter
This command configures the VLAN ID (<vlanId>) that has the multicast router mode
enabled.
Format set igmp mrouter <vlan_id>
Mode
no set igmp mrouter
This command disables multicast router mode for a particular VLAN ID (<vlan_id>).
Format no set igmp mrouter <vlan_id>
Mode
set igmp mrouter interface
This command configures the interface as a multicast router interface. When configured as a
multicast router interface, the interface is treated as a multicast router interface in all VLANs.
Default
Format set igmp mrouter interface
Mode
no set igmp mrouter interface
This command disables the status of the interface as a statically configured multicast router
interface.
Format no set igmp mrouter interface
Mode
set igmp router-alert-check
This command enables the Router-Alert validation for IGMP snooping packets
Default
Format set igmp router-alert-check
Mode
Interface Config
Interface Config
disabled
Interface Config
Interface Config
Disabled
Global Config
To Next Page
Loading...
