NETGEAR ProSafe GSM7224P - Logging Email Logtime; Logging Traps; Logging Email Test Message-Type

Utility Commands
523
ProSafe Managed Switch
logging email logtime
This command configures how frequently non-urgent email messages are sent. Non-urgent
messages are collected and sent in a batch email at the specified interval. The valid range is
every 30- 1440 minutes.
Default
Format logging email logtime <minutes>
Mode
no logging email logtime
This command resets the non-urgent log time to the default value.
Format no logging email logtime
Mode
logging traps
This command sets the severity at which SNMP traps are logged and sent in an email.
Specify the severitylevel value as either an integer from 0 to 7 or symbolically through one of
the following keywords: emergency (0), alert (1), critical (2), error (3), warning (4),
notice (5), info (6), or debug (7).
Default
Format logging traps <severitylevel>
Mode
no logging traps
This command resets the SNMP trap logging severity level to the default value.
Format no logging traps
Mode
logging email test message-type
This command sends an email to the SMTP server to test the email alerting function.
Format logging email test message-type {urgent |non-urgent |both}
message-body <message-body>
Mode
30 minutes
Global Config
Global Config
Info (6) messages and higher are logged.
Global Config
Global Config
Global Config