NETGEAR ProSafe GSM7224P - No Boot Auto-Copy-Sw; Boot Auto-Copy-Sw Trap; No Boot Auto-Copy-Sw Trap; Boot Auto-Copy-Sw Allow-Downgrade

Stacking Commands
35
ProSafe Managed Switch
no boot auto-copy-sw
This command disables stack firmware synchronization.
Format no boot auto-copy-sw
Mode
boot auto-copy-sw trap
This command sends SNMP traps related to stack firmware synchronization.
Default
Format boot auto-copy-sw trap
Mode
no boot auto-copy-sw trap
This command disables sending SNMP traps related to stack firmware synchronization.
Format no boot auto-copy-sw trap
Mode
boot auto-copy-sw allow-downgrade
This command enables downgrading the firmware version on the stack member if the
firmware version on the manager is older than the firmware version on the member.
Default
Format boot auto-copy-sw allow-downgrade
Mode
no boot auto-copy-sw allow-downgrade
This command disables downgrading the image.
Format no boot auto-copy-sw allow-downgrade
Mode
show auto-copy-sw
This command displays the stack firmware synchronization configuration status.
Format show auto-copy-sw
Mode
Privileged EXEC
Enabled
Privileged EXEC
Privileged EXEC
Enabled
Privileged EXEC
Privileged EXEC
Privileged EXEC