NETGEAR ProSafe GSM7224P - Show Ip Dvmrp Interface

Admin Mode
Version
Total Number of
Routes
Reachable
Routes
IP Multicast Commands
326
ProSafe Managed Switch
The following fields are displayed for each interface.
Interface
Interface-Mode
Operational-stat
us
show ip dvmrp interface
This command displays the interface information for DVMRP on the specified interface.
Format show ip dvmrp interface <unit/slot/port>
Modes
• Privileged EXEC
• User EXEC
Interface Mode
Metric
Local Address
The following field is displayed only when DVMRP is operational on the interface.
Generation ID
The following fields are displayed only if DVMRP is enabled on this interface.
Term Definition
Indicates whether DVMRP is enabled or disabled.
The version of DVMRP being used.
The number of routes in the DVMRP routing table.
The number of entries in the routing table with non-infinite metrics.
Term Definition
Valid slot and port number separated by forward slashes.
The mode of this interface. Possible values are Enabled and Disabled.
The current state of DVMRP on this interface. Possible values are Operational or
Non-Operational.
Term Definition
Indicates whether DVMRP is enabled or disabled on the specified interface.
The metric of this interface. This is a configured value.
The IP address of the interface.
Term Definition
The Generation ID value for the interface. This is used by the neighboring routers to
detect that the DVMRP table should be resent.
Term Definition
Received Bad
Packets
The number of invalid packets received.