NETGEAR ProSafe GSM7224P - Show Users Long; Show Users Login-History; Passwords Min-Length

Management Commands
617
ProSafe Managed Switch
Lockout........................................ False
Override Complexity Check...................... Disable
Password Strength.............................. ---
UserName....................................... guest
Privilege...................................... 1
Password Aging................................. ---
Password Expiry................................ ---
Lockout........................................ False
Override Complexity Check...................... Disable
Password Strength.............................. ---
show users long
Format show users long
Mode
Use this command to display the user’s full name.
User Name
show users login-history
Use this command to display the users who have logged in previously.
Format show users login-history [{user name}]
Mode
Login Time
Username
Protocol
Location
passwords min-length
Use this command to enforce a minimum password length for local users. The value also
applies to the enable password. The valid range is 0-64.
Default
Format passwords min-length <0-64>
Mode
Privileged EXEC
Term Definition
The full name of the user.
Privileged EXEC
Term Definition
The time at which the user logged in.
The user name used to login.
The protocol that the user used to login.
The location of the user.
8
Global Config