NETGEAR ProSafe GSM7224P - Show Ipv6 Vlan

Connected
Routes
Static Routes
OSPF Routes
Reject Routes
Number of
Prefixes
Total Routes
IPv6 Commands
371
ProSafe Managed Switch
Example: The following shows example CLI display output for the command.
(Switch) #show ipv6 route summary
IPv6 Routing Table Summary - 3 entries
Connected Routes..............................1
Static Routes.................................2
OSPF Routes...................................0
Intra Area Routes...........................0
Inter Area Routes...........................0
External Type-1 Routes......................0
External Type-2 Routes......................0
Reject Routes.................................1
Total routes..................................3
Number of Prefixes:
/64: 3
show ipv6 vlan
This command displays IPv6 VLAN routing interface addresses.
Format show ipv6 vlan
Modes
• Privileged EXEC
• User EXEC
MAC Address
used by
Routing VLANs
Term Definition
Total number of connected routes in the routing table.
Total number of static routes in the routing table.
Total number of routes installed by OSPFv3 protocol.
Total number of reject routes installed by all protocols.
Summarizes the number of routes with prefixes of different lengths.
The total number of routes in the routing table.
Term Definition
Shows the MAC address.