NETGEAR ProSafe GSM7224P - Show Lacp Actor; Port-Channel Name; Port-Channel System Priority

Switching Commands
131
ProSafe Managed Switch
port-channel name
This command defines a name for the port-channel (LAG). The interface is a logical
unit/slot/port for a configured port-channel, and <name> is an alphanumeric string up to 15
characters.
Format port-channel name {<logical unit/slot/port> | all | <name>}
Mode
port-channel system priority
Use this command to configure port-channel system priority. The valid range of <priority> is
0-65535.
Default
Format port-channel system priority <priority>
Mode
no port-channel system priority
Use this command to configure the default port-channel system priority value.
Format no port-channel system priority
Mode
show lacp actor
Use this command to display LACP actor attributes.
Format show lacp actor {<unit/slot/port>|all}
Mode
The following output parameters are displayed.
System Priority
Admin Key
Port Priority
Admin State
Global Config
0x8000
Global Config
Global Config
Global Config
Parameter Description
The system priority assigned to the Aggregation Port.
The administrative value of the Key.
The priority value assigned to the Aggregation Port.
The administrative values of the actor state as transmitted by the Actor in LACPDUs.