Slot
Slot Status
Admin State
Power State
Configured Card
Model Identifier
Pluggable
Power Down
Stacking Commands
26
ProSafe Managed Switch
If you supply a value for <unit/slot>, the following additional information appears:
Inserted Card
Model Identifier
Inserted Card
Description
Configured Card
Description
show supported cardtype
This commands displays information about all card types or specific card types supported in
the system.
Format show supported cardtype [<cardindex>]
Mode
If you do not supply a value for <cardindex>, the following output appears:
Card Index (CID)
Card Model
Identifier
If you supply a value for <cardindex>, the following output appears:
Term Definition
The slot identifier in a <unit/slot> format.
The slot is empty, full, or has encountered an error
The slot administrative mode is enabled or disabled.
The slot power mode is enabled or disabled.
The model identifier of the card preconfigured in the slot. Model Identifier is a
32-character field used to identify a card.
Cards are pluggable or non-pluggable in the slot.
Indicates whether the slot can be powered down.
Term Definition
The model identifier of the card inserted in the slot. Model Identifier is a 32-character
field used to identify a card. This field is displayed only if the slot is full.
The card description. This field is displayed only if the slot is full.
The card description of the card preconfigured in the slot.
User EXEC
Term Definition
The index into the database of the supported card types. This index is used when
preconfiguring a slot.
The model identifier for the supported card type.
Term Definition
Card Type
The 32-bit numeric card type for the supported card.
To Next Page
Loading...
Need help?
General