NETGEAR ProSafe GSM7224P - Passwords Strength Minimum Lowercase-Letters; Passwords Strength Minimum Numeric-Characters

Management Commands
620
ProSafe Managed Switch
no passwords strength minimum uppercase-letters
Use this command to reset the minimum number of uppercase letters to the default value.
Format no passwords strength minimum uppercase-characters
Mode
passwords strength minimum lowercase-letters
Use this command to enforce a minimum number of lowercase letters that a password should
contain. The valid range is 0-16. The default is 2. Minimum of 0 means no restriction on that
set of characters.
Format passwords strength minimum lowercase-letters
Mode
Default
no passwords strength minimum lowercase-letters
Use this command to reset the minimum number of lowercase letters to the default value.
Format no passwords strength minimum lowercase-characters
Mode
passwords strength minimum numeric-characters
Use this command to enforce a minimum number of numeric characters that a password
should contain. The valid range is 0-16. The default is 2. Minimum of 0 means no restriction
on that set of characters.
Format passwords strength minimum numeric-letters
Mode
Default
no passwords strength minimum numeric-characters
Use this command to reset the minimum number of numeric characters to the default value.
Format no passwords strength minimum numeric-characters
Mode
Global Config
Global Config
2
Global Config
Global Config
2
Global Config