NETGEAR ProSafe GSM7224P - Sntp Unicast Client Poll-Timeout; Sntp Unicast Client Poll-Retry

Utility Commands
538
ProSafe Managed Switch
no sntp unicast client poll-interval
This command resets the poll interval for SNTP unicast clients to its default value.
Format no sntp unicast client poll-interval
Mode
sntp unicast client poll-timeout
This command will set the poll timeout for SNTP unicast clients in seconds to a value from
1-30.
Default
Format sntp unicast client poll-timeout <poll-timeout>
Mode
no sntp unicast client poll-timeout
This command will reset the poll timeout for SNTP unicast clients to its default value.
Format no sntp unicast client poll-timeout
Mode
sntp unicast client poll-retry
This command will set the poll retry for SNTP unicast clients to a value from 0 to 10.
Default
Format sntp unicast client poll-retry <poll-retry>
Mode
no sntp unicast client poll-retry
This command will reset the poll retry for SNTP unicast clients to its default value.
Format no sntp unicast client poll-retry
Mode
Global Config
5
Global Config
Global Config
1
Global Config
Global Config