NETGEAR ProSafe GSM7224P - Port Lacptimeout (Global Config)

Switching Commands
128
ProSafe Managed Switch
no port lacpmode enable all
This command disables Link Aggregation Control Protocol (LACP) on all ports.
Format no port lacpmode enable all
Mode
port lacptimeout (Interface Config)
This command sets the timeout on a physical interface of a particular device type (actor or
partner) to either long or short timeout.
Default
Format port lacptimeout {actor | partner} {long | short}
Mode
no port lacptimeout
This command sets the timeout back to its default value on a physical interface of a particular
device type (actor or partner).
Format no port lacptimeout {actor | partner}
Mode
port lacptimeout (Global Config)
This command sets the timeout for all interfaces of a particular device type (actor or partner)
to either long or short timeout.
Default
Format port lacptimeout {actor | partner} {long | short}
Mode
no port lacptimeout
This command sets the timeout for all physical interfaces of a particular device type (actor or
partner) back to their default values.
Format no port lacptimeout {actor | partner}
Mode
Global Config
long
Interface Config
Interface Config
long
Global Config
Global Config