NETGEAR ProSafe GSM7224P - Show Ip Ospf Database Database-Summary

Routing Commands
296
ProSafe Managed Switch
The information below is only displayed if OSPF is enabled.
Format show ip ospf [<areaid>] database [{database-summary | [{asbr-summary
| external | network | nssa-external | opaque-area | opaque-as |
opaque-link | router | summary}] [{adv-router [<ipaddr>] |
self-originate}]}]
Mode
• Privileged EXEC
• User EXEC
For each link-type and area, the following information is displayed:
Adv Router
Age
Sequence
Checksum
Options
Rtr Opt
show ip ospf database database-summary
Use this command to display the number of each type of LSA in the database for each area
and for the router. The command also displays the total number of LSAs in the database.
Format show ip ospf database database-summary
Modes
• Privileged EXEC
• User EXEC
Term Definition
The Advertising Router. Is a 32 bit dotted decimal number representing the LSDB
interface.
A number representing the age of the link state advertisement in seconds.
A number that represents which LSA is more recent.
The total number LSA checksum.
This is an integer. It indicates that the LSA receives special handling during routing
calculations.
Router Options are valid for router links only.
Term Definition
Router
Total number of router LSAs in the OSPF link state database.
Network
Total number of network LSAs in the OSPF link state database.
Summary Net
Total number of summary network LSAs in the database.
Summary ASBR
Number of summary ASBR LSAs in the database.
Type-7 Ext
Total number of Type-7 external LSAs in the database.
Self-Originated
Type-7
Total number of self originated AS external LSAs in the OSPFv3 link state database.
Opaque Link
Number of opaque link LSAs in the database.
Opaque Area
Number of opaque area LSAs in the database.