NETGEAR ProSafe GSM7224P - Spanning-Tree Bpduflood; Spanning-Tree Bpduguard

Switching Commands
47
ProSafe Managed Switch
no spanning-tree bpdufilter default
Use this command to disable BPDU Filter on all the edge port interfaces.
Default
Format no spanning-tree bpdufilter default
Mode
spanning-tree bpduflood
Use this command to enable BPDU Flood on the interface.
Default
Format spanning-tree bpduflood
Mode
no spanning-tree bpduflood
Use this command to disable BPDU Flood on the interface.
Format no spanning-tree bpduflood
Mode
spanning-tree bpduguard
Use this command to enable BPDU Guard on the switch.
Default
Format spanning-tree bpduguard
Mode
no spanning-tree bpduguard
Use this command to disable BPDU Guard on the switch.
Format no spanning-tree bpduguard
Mode
Format spanning-tree bpdufilter
Mode
Global Config
enabled
Global Config
disabled
Interface Config
Interface Config
disabled
Global Config
Global Config