NETGEAR ProSafe GSM7224P - Ip Http Secure-Session Soft-Timeout; Ip Http Secure-Session Hard-Timeout

Management Commands
609
ProSafe Managed Switch
no ip http secure-session maxsessions
Use this command to restore the number of allowable secure HTTP sessions to the default
value.
Format no ip http secure-session maxsessions
Mode
ip http secure-session soft-timeout
Use this command to configure the soft timeout for secure HTTP sessions in minutes.
Configuring this value to zero will give an infinite soft-timeout. When this timeout expires, you
are forced to re-authenticate. This timer begins on initiation of the Web session and is
re-started with each access to the switch. The secure-session soft-timeout can not be set to
zero (infinite).
Default
Format ip http secure-session soft-timeout <1-60>
Mode
no ip http secure-session soft-timeout
Use this command to restore the soft timeout for secure HTTP sessions to the default value.
Format no ip http secure-session soft-timeout
Mode
ip http secure-session hard-timeout
Use this command to configure the hard timeout for secure HTTP sessions in hours. When
the timeout expires, the user is forced to re-authenticate. This timer begins on initiation of the
Web session and is unaffected by the activity level of the connection. The secure-session
hard-timeout can not be set to zero (infinite).
Format ip http secure-session hard-timeout <1-168>
Mode
no ip http secure-session hard-timeout
Use this command to reset the hard timeout for secure HTTP sessions to the default value.
Format no ip http secure-session hard-timeout
Mode
Privileged EXEC
5
Privileged EXEC
Privileged EXEC
Default
24
Privileged EXEC
Privileged EXEC