NETGEAR ProSafe GSM7224P - Show Auto-Voip

Quality of Service (QoS) Commands
489
ProSafe Managed Switch
no auto-voip
Use this command to disable VoIP Profile on the interface.
Format no auto-voip all
Mode
show auto-voip
Use this command to display the VoIP Profile settings on the interface or interfaces of the
switch.
Format show auto-voip interface {<unit/slot/port>|all}
Mode
Interface Config
Privileged EXEC
Field Description
AutoVoIP Mode
The Auto VoIP mode on the interface.
Traffic Class
The CoS Queue or Traffic Class to which all VoIP traffic is mapped to. This is not
configurable and defaults to the highest CoS queue available in the system for data
traffic.