NETGEAR ProSafe GSM7224P - Show Ip Dvmrp Neighbor; Show Ip Dvmrp Nexthop

IP Multicast Commands
327
ProSafe Managed Switch
show ip dvmrp neighbor
This command displays the neighbor information for DVMRP.
Format show ip dvmrp neighbor
Modes
• Privileged EXEC
• User EXEC
IfIndex
Nbr IP Addr
State
Up Time
Expiry Time
Generation ID
Major Version
Minor Version
Capabilities
Received
Routes
Rcvd Bad Pkts
Rcvd Bad
Routes
show ip dvmrp nexthop
This command displays the next hop information on outgoing interfaces for routing multicast
datagrams.
Format show ip dvmrp nexthop
Modes
• Privileged EXEC
• User EXEC
Received Bad
Routes
The number of invalid routes received.
Sent Routes
The number of routes that have been sent on this interface.
Term Definition
The value of the interface used to reach the neighbor.
The IP address of the DVMRP neighbor for which this entry contains information.
The state of the neighboring router. The possible value for this field are ACTIVE or
DOWN.
The time since this neighboring router was learned.
The time remaining for the neighbor to age out. This field is not applicable if the State is
DOWN.
The Generation ID value for the neighbor.
The major version of DVMRP protocol of neighbor.
The minor version of DVMRP protocol of neighbor.
The capabilities of neighbor.
The number of routes received from the neighbor.
The number of invalid packets received from this neighbor.
The number of correct packets received with invalid routes.
Term Definition