NETGEAR ProSafe GSM7224P - Show Sntp Server

Client
Supported
Modes
SNTP Version
Port
Client Mode
Utility Commands
542
ProSafe Managed Switch
show sntp server
This command is used to display SNTP server settings and configured servers.
Format show sntp server
Mode
Server Host
Address
Server Type
Server Stratum
Server
Reference ID
Server Mode
Server
Maximum
Entries
Server Current
Entries
For each configured server:
Term Definition
Supported SNTP Modes (Broadcast, Unicast, or Multicast).
The highest SNTP version the client supports.
SNTP Client Port.
Configured SNTP Client Mode.
Privileged EXEC
Term Definition
IP address or hostname of configured SNTP Server.
Address Type of Server.
Claimed stratum of the server for the last received valid packet.
Reference clock identifier of the server for the last received valid packet.
SNTP Server mode.
Total number of SNTP Servers allowed.
Total number of SNTP configured.
Term Definition
Host Address
IP address or hostname of configured SNTP Server.
Address Type
Address Type of configured SNTP server.
Priority
IP priority type of the configured server.
Version
SNTP Version number of the server. The protocol version used to query the server in
unicast mode.
Port
Server Port Number.
Last Attempt
Time
Last server attempt time for the specified server.