Routing Commands
244
ProSafe Managed Switch
clear ip route all
This command removes all the route entries learned over the network.
Format clear ip route all
Mode
Protocol
Total
Number of
Routes
show ip brief
This command displays all the summary information of the IP, including the ICMP rate limit
configuration and the global ICMP Redirect configuration.
The following shows example CLI display output for the command.
(Switch) #show ip brief
Default Time to Live........................... 64
Routing Mode................................... Disabled
Maximum Next Hops.............................. 4
Maximum Routes................................. 6000
Privileged EXEC
Tells which protocol added the specified route. The possibilities are: local, static, OSPF, or
RIP.
The total number of routes.
Format show ip brief
Modes
• Privileged EXEC
• User EXEC
Term Definition
Default Time to Live
The computed TTL (Time to Live) of forwarding a packet from the local router to the
final destination.
Routing Mode
Shows whether the routing mode is enabled or disabled.
Maximum Next Hops
The maximum number of next hops the packet can travel.
Maximum Routes
The maximum number of routes the packet can travel.
ICMP Rate Limit
Interval
Shows how often the token bucket is initialized with burst-size tokens.
Burst-interval is from 0 to 2147483647 milliseconds. The default burst-interval is
1000 msec.
ICMP Rate Limit
Burst Size
Shows the number of ICMPv4 error messages that can be sent during one
burst-interval. The range is from 1 to 200 messages. The default value is 100
messages.
ICMP Echo Replies
Shows whether ICMP Echo Replies are enabled or disabled.
ICMP Redirects
Shows whether ICMP Redirects are enabled or disabled.
To Next Page
Loading...
