NETGEAR ProSafe GSM7224P - Passwords History; Passwords Aging

Management Commands
618
ProSafe Managed Switch
no passwords min-length
Use this command to set the minimum password length to the default value.
Format no passwords min-length
Mode
passwords history
Use this command to set the number of previous passwords that shall be stored for each user
account. When a local user changes his or her password, the user will not be able to reuse
any password stored in password history. This ensures that users don’t reuse their
passwords often. The valid range is 0-10.
Default
Format passwords history <0-10>
Mode
no passwords history
Use this command to set the password history to the default value.
Format no passwords history
Mode
passwords aging
Use this command to implement aging on passwords for local users. When a user’s
password expires, the user will be prompted to change it before logging in again. The valid
range is 1-365. The default is 0, or no aging.
Default
Format passwords aging <1-365>
Mode
no passwords aging
Use this command to set the password aging to the default value.
Format no passwords aging
Mode
Global Config
0
Global Config
Global Config
0
Global Config
Global Config