NETGEAR ProSafe GSM7224P - Chapter 6 IP Multicast Commands; Multicast Commands

318
6
6. IP Multicast Commands
This chapter describes the IP Multicast commands available in the managed switch CLI.
Note: Commands described in this chapter that require a license are:
Multicast Commands
DVMRP Commands
PIM Commands
Internet Group Message Protocol (IGMP) Commands
IGMP Proxy Commands
This chapter contains the following sections:
• Multicast Commands
• DVMRP Commands
• PIM Commands
• Internet Group Message Protocol (IGMP) Commands
• IGMP Proxy Commands
The commands in this chapter are in two functional groups:
• Show commands display switch settings, statistics, and other information.
• Configuration commands configure features and options of the switch. For every
configuration command, there is a show command that displays the configuration setting.
Multicast Commands
This section describes the commands you use to configure IP Multicast and to view IP
Multicast settings and statistics.