NETGEAR ProSafe GSM7224P - Packet Capture Commands; Capture Transmit Packet; Capture Receive Packet; Capture All Packets

Utility Commands
560
ProSafe Managed Switch
Packet Capture Commands
Packet capture commands assist in troubleshooting protocol-related problems with the
management CPU. The packets to and from the management CPU can be captured in an
internally allocated buffer area for export to a PC host for protocol analysis. Public domain
packet analysis tools like Ethereal can be used to decode and review the packets in detail.
Capturing can be performed in a variety of modes, either transmit-side only, receive-side only,
or both. The number of packets captured will depend on the size of the captured packets.
capture transmit packet
This command enables the capturing of transmit packets.
Format capture transmit packet
Mode
no capture transmit packet
This command disables the capturing of transmit packets.
Format no capture transmit packet
Mode
capture receive packet
This command enables the capturing of receive packets.
Format capture receive packet
Mode
no capture receive packet
This command disables the capturing of receive packets.
Format no capture receive packet
Mode
capture all packets
This command enables the capturing of receive packets.
Format capture all packet
Mode
Global Config
Global Config
Global Config
Global Config
Global Config