Utility Commands
557
ProSafe Managed Switch
<server-address> is a valid IPv4 or IPv6 address of the server. The preference of the
servers is determined by the order they were entered.
Format ip name-server <server-address1> [server-address2...server-address8]
Mode
no ip name server
Use this command to remove a name server.
Format no ip name-server [server-address1...server-address8]
Mode
ip host
Use this command to define static host name-to-address mapping in the host cache. <name>
is host name. <ip address> is the IP address of the host.
Default
Format ip host <name> <ipaddress>
Mode
no ip host
Use this command to remove the name-to-address mapping.
Format no ip host <name>
Mode
ipv6 host
Use this command to define static host name-to-IPv6 address mapping in the host cache.
<name> is host name. <v6 address> is the IPv6 address of the host.
Default
Format ipv6 host <name> <v6 address>
Mode
no ipv6 host
Use this command to remove the static host name-to-IPv6 address mapping in the host
cache.
Format no ipv6 host <name>
Mode
Global Config
Global Config
none
Global Config
Global Config
none
Global Config
Global Config
To Next Page
Loading...
