NETGEAR ProSafe GSM7224P - Service Dhcp; Ip Dhcp Bootp Automatic; Ip Dhcp Conflict Logging

Utility Commands
551
ProSafe Managed Switch
service dhcp
This command enables the DHCP server.
Default
Format service dhcp
Mode
no service dhcp
This command disables the DHCP server.
Format no service dhcp
Mode
ip dhcp bootp automatic
This command enables the allocation of the addresses to the bootp client. The addresses are
from the automatic address pool.
Default
Format ip dhcp bootp automatic
Mode
no ip dhcp bootp automatic
This command disables the allocation of the addresses to the bootp client. The address are
from the automatic address pool.
Format no ip dhcp bootp automatic
Mode
ip dhcp conflict logging
This command enables conflict logging on DHCP server.
Default
Format ip dhcp conflict logging
Mode
Format no ip dhcp ping packets
Mode
Global Config
disabled
Global Config
Global Config
disabled
Global Config
Global Config
enabled
Global Config