NETGEAR ProSafe GSM7224P - Clear Lldp Statistics; Show Lldp; Show Lldp Interface; Clear Lldp Remote-Data

Switching Commands
189
ProSafe Managed Switch
no lldp notification-interval
Use this command to return the notification interval to the default value.
Format no lldp notification-interval
Mode
clear lldp statistics
Use this command to reset all LLDP statistics, including MED-related information.
Format clear lldp statistics
Mode
clear lldp remote-data
Use this command to delete all information from the LLDP remote data table, including
MED-related information.
Format clear lldp remote-data
Mode
show lldp
Use this command to display a summary of the current LLDP configuration.
Format show lldp
Mode
Transmit
Interval
Transmit Hold
Multiplier
Re-initialization
Delay
Notification
Interval
show lldp interface
Use this command to display a summary of the current LLDP configuration for a specific
interface or for all interfaces.
Format show lldp interface {<unit/slot/port> | all}
Mode
Global Config
Privileged Exec
Global Config
Privileged Exec
Term Definition
How frequently the system transmits local data LLDPDUs, in seconds.
The multiplier on the transmit interval that sets the TTL in local data LLDPDUs.
The delay before re-initialization, in seconds.
How frequently the system sends remote data change notifications, in seconds.
Privileged Exec