NETGEAR ProSafe GSM7224P - Page 133

Switching Commands
133
ProSafe Managed Switch
show port-channel
This command displays the static capability of all port-channels (LAGs) on the device as well
as a summary of individual port-channels.
Format show port-channel
Mode
• Privileged EXEC
• User EXEC
For each port-channel the following information is displayed:
Name
Link-State
Mbr Ports
Active Ports
show port-channel
This command displays an overview of all port-channels (LAGs) on the switch.
Format show port-channel {<logical unit/slot/port> | all}
Mode
• Privileged EXEC
• User EXEC
Term Definition
Static
Capability
This field displays whether or not the device has static capability enabled.
Term Definition
This field displays the name of the port-channel.
Shows whether the link is up or down.
This field lists the ports that are members of this port-channel, in <unit/slot/port> notation.
The ports that are actively participating in the port-channel.
Term Definition
Logical
Interface
Valid slot and port number separated by forward slashes.
Port-Channel
Name
The name of this port-channel (LAG). You may enter any string of up to 15 alphanumeric
characters.
Link State
Indicates whether the Link is up or down.
Admin Mode
May be enabled or disabled. The factory default is enabled.
Type
The status designating whether a particular port-channel (LAG) is statically or
dynamically maintained.
• Static - The port-channel is statically maintained.
• Dynamic - The port-channel is dynamically maintained.