R&S M3SR 4100 Series - Changing Radio IP Settings Using Upd32.Exe Tool; Figure 2.14 Radio IP Settings (Example)

Operating Manual 6175.4760.02 – 01 2.35
M3SR Series 4100 Basic Configuration of the Radio
Figure 2.14 Radio IP Settings (Example)
1 Radio IP Address
2 Radio Subnet Mask
3 Radio Gateway Address
2.8.2 Changing Radio IP Settings Using Upd32.exe Tool
The following description guides through the individual steps required to change the radio
default IP settings (see Table 2.1) with the help of the upd32.exe tool. The upd32.exe tool is
a PC (Windows) application provided by Rohde & Schwarz to update your radio with new
software and to change the radio IP settings.
To change the radio IP settings using the upd32.exe, the following devices are required:
• PC with upd32.exe software installed (with appropriate configuration and data files avail-
able, see upd32.exe online help)
• LAN where the PC and the radio are connected (e.g. using a switch or HUB).
ICN-4D-J-231000-R-D0894-00085-A-01-1
1
2
3