R&S M3SR 4100 Series - Required Power Supply; Required Power Supply for Receiver

M3SR Series 4100 Required Power Supply
1.10 Operating Manual 6175.4760.02 – 01
1.7 Required Power Supply
1.7.1 Required Power Supply for Receiver
No power supply is required.
The internal Power Supply R&S IN4400A needs an input voltage of
100 V AC to 240 V AC / 50 Hz to 60 Hz.
The radio may also be powered by an external battery (19V DC to 31 V DC). An automatic
switchover facility integrated in the radio provides for automatic standby switchover in case
primary power fails.