M3SR Series 4100 Terminating a Link
4.172 Operating Manual 6175.4760.02 – 01
4.8.3.7 Terminating a Link
By means of softkey 'Terminate Link' the operator can terminate the running link.
Softkey Type Description
Activate 1. Press 'Terminate Link' softkey.
When the linked stations have finished com-
municating, it is necessary to terminate the link
so that the stations can return to availability.
The link can be terminated in two ways:
• Manually by pressing softkey 'Terminate
Link'.
• Automatically through a non-activity time-
out of approximately 10 seconds.
In a voice link the link is terminated automati-
cally and completely if the opposite communi-
cation (transmit direction) partner stops
transmission by releasing PTT. In a data link
the link is terminated automatically and com-
pletely if the data from the opposite communi-
cation (transmit direction) partner is
completely transferred.
The 'Terminate' softkey (while there is an ac-
tive link) terminates the link
• for a very short time in transmit direction -
a new LSU (link setup) is transmitted
• for approx. one minute in receive direction
- LTE (late traffic entry) is possible after
one minute.
To Next Page
Loading...