M3SR Series 4100 ALE-2G Home Menus
4.12 Operating Manual 6175.4760.02 – 01
4.3.4 ALE-2G Home Menus
After selecting the ALE operation mode the radio comes up with the ALE-2G Preset Page.
In the central area the current main ALE settings and status parameters are displayed. As in
all other waveforms, some parameters are changing when switching to transmission. For in-
stance, the Tx output power and VSWR indication are shown instead of the RF level bar
graph.
Figure 4.3 Home Menu: ALE-2G (Listening, Rx Mode)
1 Linking status and frequency:
• LISTENING: No link established.
• CALL TO: Call initiated.
• CALL ACTIVE: Link established.
- CALL LQA: Link quality information is transmitted
- RCVE LQA: Link quality information is received
• TERMINATING LINK: Terminating the current established link.
2 Partner Address: list of responding partners
3 Self Address
4 Scan Group
5 Next Call Address
6 Scan Group to be used for the next outgoing call
7 Time Uncertainty
8LSU Mode
9 Receive Level
10 Automatic Gain Control (AGC)
11 Signal-to-Noise Ratio (S/N)
1
2
3
4
5
6
7
8
9
10
11
ICN-4D-G-231072-R-D0894-00003-A-01-1
To Next Page
Loading...