Operating Manual 6175.4760.02 – 01 2.43
M3SR Series 4100 Basic Configuration of the Control Unit
Figure 2.21 Radio IP Address List of Control Unit
1 Logical Radio Address in Radio IP Address List
2 Radio IP Address in Radio IP Address List
When the radio IP address is changed (via softkey on menu page 3002 or by a remote con-
trol system), the MMI receives this new IP address and creates an entry in the radio address
list in control unit maintenance menu 4003. This entry has the logical name NEWIPADD
(new IP address) and contains the new IP address of the radio. If this entry already exists, it
gets updated with the new address. This information now can be used to make the correct
settings for the CU so that it can connect to the radio again: Set the CU’s own IP address to
an address in the same network as the radio is in. If desired, create a new entry in the ad-
dress list with a meaningful name using the new IP address or connect the CU directly to
entry NEWIPADD.
1
2
ICN-4D-H-231000-R-D0894-00094-A-01-1
To Next Page
Loading...