R&S M3SR 4100 Series - Figure 3.13 Position of Softkey Previous (Example); Table 3.13 Navigation Buttons

M3SR Series 4100 Operating Concept
3.28 Operating Manual 6175.4760.02 – 01
Figure 3.13 Position of Softkey 'Previous' (Example)
1 Softkey 'PREV'
Depending on the state of connection (see sect. 3.3 Control and Monitoring of Radio
and Control Unit), the session type (see sect. 3.3 Control and Monitoring of Radio and
Control Unit) or special radio states or modes, some menus will be disabled. In this
case the softkeys to navigate to these menus are disabled (grayed out) or not shown
at all. In the case a menu is displayed and the connection state, session type or radio
mode changes, so that the current menu cannot be displayed any longer, the GUI will
automatically navigate to the Home menu.
Table 3.13 Navigation Buttons
Button Note
Press this button to return from anywhere in the menu tree to the Home menu.
ICN-4D-G-231000-R-D0894-00030-A-01-1
1