M3SR Series 4100 Channel List
3.218 Operating Manual 6175.4760.02 – 01
3.9.4.13 Channel List
Softkey Softkey Type Description
Editor 1. Press 'Add Channel' softkey.
2. Enter channel number.
3. Press 'ENT' key to confirm.
Possible values:
All predefined channels that has at least one
type of squelch set on.
Only predefined channels can be stored
into the channel list.
1. Choose channel from scanning channel
list.
2. Press 'Delete Channel' softkey.
3. Press 'ENT' key to confirm.
Possible values:
All channel numbers that are previously added
to the scanning list.
The softkey 'Delete Channel' is enabled
only if there is at least one channel added
to the channel list.
Activate 1. Press 'Delete Channel List' softkey.
2. Choose Yes or No to delete channel list.
3. Press 'ENT' key to confirm.
The softkey 'Delete Channel List' is en-
abled only if there is at least one channel
added to the channel list.
To Next Page
Loading...
Need help?
General
