R&S M3SR 4100 Series - Changing the PEP (Peak Envelope Power) to Average Power Factor

M3SR Series 4100 Changing the PEP (Peak Envelope Power) to Average Power Factor
3.164 Operating Manual 6175.4760.02 – 01
3.7.2.27 Changing the PEP (Peak Envelope Power) to Average Power Factor
Softkey Softkey Type Description
Editor 1. Press 'PEP/PAvg' softkey.
2. Change to desired value.
Possible values:
0 dB to 12 dB
With this setting, the automatic level control
(ALC) of the power amplifier can be adjusted
to the characteristic of external modems to
achieve highly linear signal amplification. It af-
fects the J2D and B7D Tx direction only.